 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SMB10(8)J5.0(C) thru SMB10(8)J40(C)A Vishay General Semiconductor High Power Density Surface Mount TRANSZORB(R) Transient Voltage Suppressors FEATURES * Low profile package * Ideal for automated placement * Glass passivated chip junction * Available in uni-directional and bi-directional * Excellent clamping capability * Very fast response time * Low incremental surge resistance * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-214AA (SMBJ) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types DO-214AA (SMB) PRIMARY CHARACTERISTICS VWM PPPM (uni-directional) PPPM (bi-directional) IFSM (uni-directional only) TJ max. 5.0 V to 40 V 1000 W 800 W 100 A 150 C MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s waveform (1)(2) (Fig. 1) Peak pulse current with a 10/1000 s waveform (1) Peak forward surge current 8.3 ms single half sine-wave uni-directional only Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal (2) SYMBOL uni-directional bi-directional PPPM IPPM IFSM TJ, TSTG VALUE 1000 800 See next table 100 - 55 to + 150 UNIT W A A C Document Number: 88422 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 SMB10(8)J5.0(C) thru SMB10(8)J40(C)A Vishay General Semiconductor UNI-DIRECTIONAL ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE MARKING CODE 1AD 1AE 1AF 1AG 1AH 1AK 1AL 1AM 1AN 1AP 1AQ 1AR 1AS 1AT 1AU 1AV 1AW 1AX 1AY 1AZ 1BD 1BE 1BF 1BG 1BH 1BK 1BL 1BM 1BN 1BP 1BQ 1BR 1BS 1BT 1BU 1BV 1BW 1BX 1BY 1BZ 1CD 1CE 1CF 1CG 1CH 1CK 1CL 1CM 1CN 1CP 1CQ 1CR BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 MAX. 7.82 7.07 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 TEST CURRENT IT (mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 MAXIMUM REVERSE LEAKAGE AT VWM ID (A) 1000 1000 1000 1000 500 500 200 200 100 100 50 50 20 20 10 10 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) 104.2 108.7 87.7 97.1 81.3 89.3 75.2 83.3 69.9 77.5 66.7 73.5 62.9 69.4 59.2 64.9 53.2 58.8 49.8 54.9 45.5 50.3 42.0 46.5 38.8 43.1 37.2 41.0 34.7 38.5 32.8 36.2 31.1 34.2 27.9 30.9 25.4 28.2 23.3 25.7 21.5 23.8 20.0 22.0 18.7 20.7 16.9 18.8 15.6 17.2 14.0 15.5 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 DEVICE TYPE SMB10J5.0 SMB10J5.0A SMB10J6.0 SMB10J6.0A SMB10J6.5 SMB10J6.5A SMB10J7.0 SMB10J7.0A SMB10J7.5 SMB10J7.5A SMB10J8.0 SMB10J8.0A SMB10J8.5 SMB10J8.5A SMB10J9.0 SMB10J9.0A SMB10J10 SMB10J10A SMB10J11 SMB10J11A SMB10J12 SMB10J12A SMB10J13 SMB10J13A SMB10J14 SMB10J14A SMB10J15 SMB10J15A SMB10J16 SMB10J16A SMB10J17 SMB10J17A SMB10J18 SMB10J18A SMB10J20 SMB10J20A SMB10J22 SMB10J22A SMB10J24 SMB10J24A SMB10J26 SMB10J26A SMB10J28 SMB10J28A SMB10J30 SMB10J30A SMB10J33 SMB10J33A SMB10J36 SMB10J36A SMB10J40 SMB10J40A Notes: (1) Pulse test: tp 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (4) VF = 3.5 V at IF = 50 A (uni-directional only) www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88422 Revision: 22-Oct-08 SMB10(8)J5.0(C) thru SMB10(8)J40(C)A Vishay General Semiconductor BI-DIRECTIONAL ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE MARKING CODE 1AD 1AE 1AF 1AG 1AH 1AK 1AL 1AM 1AN 1AP 1AQ 1AR 1AS 1AT 1AU 1AV 1AW 1AX 1AY 1AZ 1BD 1BE 1BF 1BG 1BH 1BK 1BL 1BM 1BN 1BP 1BQ 1BR 1BS 1BT 1BU 1BV 1BW 1BX 1BY 1BZ 1CD 1CE 1CF 1CG 1CH 1CK 1CL 1CM 1CN 1CP 1CQ 1CR BREAKDOWN VOLTAGE VBR (1) (V) MIN. 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 MAX. 7.82 7.25 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 TEST CURRENT AT IT (mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 MAXIMUM REVERSE LEAKAGE AT VWM ID (A) (3) 2000 2000 2000 2000 1000 1000 400 400 200 200 100 100 40 40 20 20 10 10 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) 83.3 87.0 70.2 77.7 65.0 71.4 60.2 66.7 55.9 62.0 53.3 58.8 50.3 55.6 47.3 51.9 42.6 47.1 39.8 44.0 36.4 40.2 33.6 37.2 31.0 34.5 29.7 32.8 27.8 30.8 26.2 29.0 24.8 27.4 22.3 24.7 20.3 22.5 18.6 20.6 17.2 19.0 16.0 17.6 15.0 16.5 13.6 15.0 12.4 13.8 11.2 12.4 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 DEVICE TYPE SMB8J5.0C SMB8J5.0CA SMB8J6.0C SMB8J6.0CA SMB8J6.5C SMB8J6.5CA SMB8J7.0C SMB8J7.0CA SMB8J7.5C SMB8J7.5CA SMB8J8.0C SMB8J8.0CA SMB8J8.5C SMB8J8.5CA SMB8J9.0C SMB8J9.0CA SMB8J10C SMB8J10CA SMB8J11C SMB8J11CA SMB8J12C SMB8J12CA SMB8J13C SMB8J13CA SMB8J14C SMB8J14CA SMB8J15C SMB8J15CA SMB8J16C SMB8J16CA SMB8J17C SMB8J17CA SMB8J18C SMB8J18CA SMB8J20C SMB8J20CA SMB8J22C SMB8J22CA SMB8J24C SMB8J24CA SMB8J26C SMB8J26CA SMB8J28C SMB8J28CA SMB8J30C SMB8J30CA SMB8J33C SMB8J33CA SMB8J36C SMB8J36CA SMB8J40C SMB8J40CA Notes: (1) Pulse test: tp 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 Document Number: 88422 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 SMB10(8)J5.0(C) thru SMB10(8)J40(C)A Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance, junction to ambient Typical thermal resistance, junction to lead Note: (1) Mounted on minimum recommended pad layout (1) SYMBOL RJA RJL VALUE 72 20 UNIT C/W C/W ORDERING INFORMATION (Example) PREFERRED P/N SMB10J5.0A-E3/52 SMB10J5.0A-E3/5B SMB10J5.0AHE3/52 (1) SMB10J5.0AHE3/5B (1) UNIT WEIGHT (g) 0.106 0.106 0.106 0.106 PREFERRED PACKAGE CODE 52 5B 52 5B BASE QUANTITY 750 3200 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) tr = 10 s Peak Value IPPM TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM 10 SMB10J5.0 SMB10J40A 100 Half Value - IPP IPPM 2 50 10/1000 s Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 1 SMB8J5.0C SMB8J40CA 100 s 1.0 ms 10 ms 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0.1 0.1 s 1.0 s 10 s td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 100 10 000 75 CJ - Junction Capacitance (pF) Measured at Zero Bias 1000 50 100 25 VR, Measured at Stand-Off Voltage VWM TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 100 200 Bi-Directional 0 0 25 50 75 100 125 150 175 200 10 1 TJ - Initial Temperature (C) VWM - Reverse Stand-Off Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88422 Revision: 22-Oct-08 SMB10(8)J5.0(C) thru SMB10(8)J40(C)A Vishay General Semiconductor 100 200 Transient Thermal Impedance (C/W) Peak Forward Surge Current (A) 8.3 ms Single Half Sine-Wave Uni-Directional Only 100 10 1.0 0.01 0.1 1 10 100 1000 10 1 10 100 tp - Pulse Duration (s) Number of Cycles at 60 Hz Figure 5. Typical Transient Thermal Impedance Figure 6. Maximum Non-Repetitive Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band 0.085 (2.159) MAX. Mounting Pad Layout 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.220 REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Document Number: 88422 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of SMB10J60
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |